Post by ACW on Apr 26, 2006 12:52:23 GMT -5
mjb said:
Sewinman,If it's a standard System 2 reel it's not as easy as suggested. I have the written instructions here and will attempt to describe what it says without the pictures.
1) Looking at the back of the reel, rotate the drag knob anti-clockwise until it stops. Remove the spool and make a note of the position of the punch mark on the nut in the middle of the 'yoke' over the drag assmebly.
2) Remove the screws at either side of the of the 'yoke' and lift the 'yoke' off. Now rotate the plate that is sitting over the cogged wheel anti-clockwise until it's clear of the cogged wheel.
3) Lift the cog and turn it over and do the reverse of steps 1 and 2.
Hope this makes sense. If not give me your address and I'll post the instruction book to you.
MJB you were spot on ,strange I have several system 2s and all with different set ups .
Now thats another excuse to get a pint or three with nogoodboyo .
NGB its done !!