|
|
Post by davidarmes on Mar 26, 2006 5:09:17 GMT -5
is their anyone who makes
a 13ft 7-9 Salmon Double Handed
7 Piece Travel rod blank ??
|
|
|
|
Post by jmr on Mar 26, 2006 8:33:54 GMT -5
i expect that bruce and walker woudl do you a 6 piece based on the norway if you asked them.
|
|
|
|
Post by G Ritchie on Mar 27, 2006 3:13:40 GMT -5
is their anyone who makes a 13ft 7-9 Salmon Double Handed 7 Piece Travel rod blank ?? It would be difficult to set up a 7 piece double handed rod of 13 ft if all the pieces were the same length, simply due to the length of the cork handle. Even if you used a relatively short handle of 25 inches, you would still need another 3 inches above that for the ferrule, giving a section length of 28 inches. A six piece blank consisting of 28 inch sections will give you a rod of about 13 feet when assembled allowing for ferrule length. As suggested, contact B&W, they could provide a blank based on the 13 feet Norway Speycaster. |
|
|
|
Post by Silver Stoat on Mar 27, 2006 4:49:58 GMT -5
Regarding the handle section, you could spigot the lower handle to slot into the reel fitting.
This would then allow you to have seven pieces plus the lower handle.
Dave.
|
|
