|
Post by steelpony on Nov 28, 2005 19:19:29 GMT -5
Any of you guys use Temple Fork rods for saltwater flyfishing, I have a chance of a TiCr, or TiCrx 9wt. at a good price. Any advice appreciated.
|
|
|
Post by Sewinbasher on Nov 28, 2005 19:36:19 GMT -5
Any of you guys use Temple Fork rods for saltwater flyfishing, I have a chance of a TiCr, or TiCrx 9wt. at a good price. Any advice appreciated. I have a 9' #4 TiCR which I love - very good value for money and designed by Lefty Kreh, my brother has a 10' #7 and also loves it. Recommended!!
|
|
|
Post by Gonzo on Nov 29, 2005 3:37:16 GMT -5
I used to own the TiCr Pro in an 8#. I found it a bit slow action, for me. I know alot of people who own the TiCrx and love them. They are quite a gun and you may find the 9# overkill for the U.K. It's been said qite alot recently but the Redington CPS in 8# is spot on for the U.K and just about anywhere else on fish up to double-figures - including Bonefish.
Just my 2 cents worth!
|
|
|
Post by steelpony on Nov 29, 2005 19:37:25 GMT -5
I heard today from one who has fished the TiCrx 9 #. that it is really an 11#. also that the 8 #. is nice with a 9 # line. This bears out what you say Gonzo. Would the Redington CPS 8# be capable of casting a big bass fly into the wind
|
|
|
Post by HaresEar on Nov 30, 2005 15:05:07 GMT -5
Hi Steelpony, Iv'e got the TiCrX 9# and i'd say it's more a 9 1/2 #....they are stiff in the butt section and a very fast taper. It was an excellent rod for the Cape Cod Stripers and Blues ;D I like them, the 9# is a little over the top for the UK , but having said that. i still use it when the need arrives. Have just got an 8# TcIrX which suits me fine, they are very strong and capable rods. Best advice is to try a few rods if possible...your style/experience will influence how a rod feels in your hands. Depending on your skill, you can underline/overline most rods if you want...a stiff rod may need overlining if you can't bend it enough with the correct # line. Dave
|
|
|
Post by Gonzo on Nov 30, 2005 19:53:16 GMT -5
SP What Dave has said is about right and it is always advisable to test a rod before buying first. The CPS can cast a big fly OK and it works well over lined by one # line as well... So It really comes down to personal preference and cost at the end of the day. The CPS is great value if you get it from the States and avoid paying duty. The TFO is a little cheaper and both rods, when bought new, have a lifetime warranty. The decision is yours!
|
|
|
Post by jrt on Dec 1, 2005 17:39:16 GMT -5
TFO are good rods but I found the TiCR and the TiCRX heavy when compared to most 8 and 9wts. The CPS is SUPER light. JRT
|
|
|
Post by steelpony on Dec 2, 2005 12:51:39 GMT -5
Seems like the CPS is one to think about, I am only an average caster, would the 9wt. cast ok as a 9 wt. Any feedback on the Vision GT4 9 wt. Thanks again for the advice.
|
|
|
Post by steelpony on Dec 4, 2005 18:55:33 GMT -5
I am going to go for the Reddington CPS 9' 8wt. and see how I get on with it. Thanks again for all the advice.
|
|
|
Post by davidarmes on Dec 5, 2005 7:38:16 GMT -5
How about 9ft 8Wt 4 piece Bloke rod ?
|
|
MJB
Full Member
Posts: 174
|
Post by MJB on Dec 5, 2005 7:46:13 GMT -5
Bloke #8 is too heavy, especially compared to the CPS.
|
|
|
Post by Paul Boote on Dec 5, 2005 8:06:38 GMT -5
Martin / Anyone,
I have an old, much-fished and -liked but now fairly knackered Sage 9ft # 8 3-pc RPLX. How does the Redington CPS compare - faster, the same, slower?
|
|
|
Post by jrt on Dec 5, 2005 12:02:06 GMT -5
If I remember the RPLX was stiffer and faster than the RPLXi and regarded by many as a better rod. The CPS is lighter and faster than the RPLX. The fittings aren't as good and the stripper guides are a tad small but a stonking rod. Guide sell these for £250 which does seem steep as they are a $250 rod. For some reason Guide don't stock the 9ft 8wt either, only the 9ft6in 8wt?
JRT
|
|
|
Post by Paul Boote on Dec 5, 2005 15:27:20 GMT -5
Thanks. It would have to be the 9 footer, though, as anything longer in 8-weight and above tends to very quickly cripple me. The search continues...
|
|
|
Post by steveL on Dec 6, 2005 8:25:15 GMT -5
Paul, Ever thought of a Winston BIIX? They are super light, (the 9' #8 is only 3.75oz) and are well regarded by SWFFers and steelheaders in the US. You'd have to go to the continent to get one, around 500euro or a Foxon made one could be cheaper. It has a softer action but with the boron fibres still has loads of strength.
|
|