Braveheart 5 Star Member
     member is offline
![[avatar] [avatar]](http://img318.imageshack.us/img318/8303/fishing8zb.gif)
"Fide et fortudine"
Joined: Jun 2003 Gender: Male  Posts: 1,408 Location: basingstoke
|  | Hopper 2 for 1 « Thread Started on Apr 15, 2006, 12:48pm » | |
Here is a step by step guide for the Hopper and also a variation, the Bubble Hopper.
Hook- Kamasan B170 size 12 Thread- Black Rib- medium flat Pearl Mylar Body-Black Seals Fur (or claret,orange,ginger and hares ear etc) Legs- Knotted Pheasant Tail Hackle- Black Cock (not genetic) (omitted on the Bubble Hopper) Bubble- 2 natural CDC feathers (only on the bubble hopper)
STEP 1 Mount the hook in the vice, attach and wind on the thread, catch in the rib as you wind towards the bend of the hook, then dub the thread with a small amount of black seals fur.
![[image] [image]](http://img215.imageshack.us/img215/65/aastage1111za.jpg)
STEP 2 Wind the dubbed body forward and follow with the rib.
![[image] [image]](http://img215.imageshack.us/img215/512/bbstage2114np.jpg)
STEP 3 Mount four legs under the body so that two sit either side.
![[image] [image]](http://img232.imageshack.us/img232/876/ccstage3115cn.jpg)
STEP 4 Tie in the hackle, near side of the hook, shiny (good) side towards you.
![[image] [image]](http://img509.imageshack.us/img509/310/ddstage4115oo.jpg)
STEP 5 Wind the hackle towards the eye, tie down and whip finish.
![[image] [image]](http://img20.imageshack.us/img20/1029/eecompleted1117al.jpg)
For the bubble hopper repeat STEPS 1 and 2
STEP 3 Mount 2 CDC feathers on top of the hook with the natural curve upwards.
![[image] [image]](http://img20.imageshack.us/img20/5258/ffbubble1110cp.jpg)
STEP 4 Add a little more dubbing in the thorax area.
![[image] [image]](http://img206.imageshack.us/img206/5725/ggbubble2110vr.jpg)
STEP 5 Pull the 2 CDC feathers over in a loose loop towards the eye and tie down
![[image] [image]](http://img519.imageshack.us/img519/4065/hhbubble3114gj.jpg)
STEP 6 Trim waste and whip finish.
![[image] [image]](http://img517.imageshack.us/img517/5151/iicompletebubble113fw.jpg)
Both flies side by side for comparison
![[image] [image]](http://img443.imageshack.us/img443/9594/jjsidebyside113vi.jpg)
When tying in the legs it is important to tie them under the shank, I see many with the legs tied on top, that IMO is wrong. For the hackle on hoppers I like to use Indian capes, a rare case of cheaper is better and I also like to tie them sparsely.
To fish the standard hopper, simply gink up the hackle and fish static or twitch occasionally. Or don’t gink and fish as a wet fly. Do not treat the bubble hopper and fish either static or with the occasional twitch, or for something a bit different give it a pull and it will go under the surface then pop back up, on occasions the fish will find this irresistible.
|
|
|