Fly Fishing Forums - Suspender buzzer Heads My Way :)

Fly Fishing Forums
« Suspender buzzer Heads My Way :) »

Welcome Guest. Please Login or Register.
Sept 2, 2010, 5:26pm

Fly Fishing Forums :: Fly Fishing Forums :: Fly Tying - Step By Step :: Suspender buzzer Heads My Way :)

Author

Topic: Suspender buzzer Heads My Way :) (Read 4,945 times)

Daver
5 Star Member

member is offline

[avatar]

Brown Bowl

[msn]

Joined: Jun 2003
Posts: 869

Suspender buzzer Heads My Way :)
« Thread Started on Apr 15, 2006, 6:12am »

Hi all thought as I have been asked a few time how I do my suspender buzzer heads, so here goes

Step 1: -

Size 12 B100 in the vice

Step 2: -

Cut a thin strip of eathafoam about 4mm-5mm wide, I use the stuff fly boxes are lined with but not the sticky back kind

Step 3: -

Run the thread I always use black down the shank until it is in line with point of the hook.

Step 4: -

Tie in the foam point backwards and run the thread to the eye of the hook as shown.

Step 5: -

Pull the foam over and tie off at the eye of the hook with 2 turns of thread. But make sure that you pull the foam over the side/top of the hook shank not directly over the middle of the shank as shown.

Step 6: -

Bring the thread under the foam and put a couple of wraps behind the foam below the point of the hook point.

Step 7: -

Pull the remaining foam back and tie off, making sure you bring it along the frontside as shown.

Step 8: - Trim the foam after securing it with a few turns of thread.
It will be the shape of a peach or a b um

as seen

now run the thread to the bend and tie in your medium pearl rib as shown.

Step 9: - Dub some hares ear onto your thread for the body of the fly

Step 10 : -

Wind the hares ear up the body keeping it tight and stop about 4mm from the foam head as shown.

Step 11: - Rib the fly with 4 turns of pearl mylar no more and no less and tie off.

Step 12: - Dub on some hot orange seals fur or substitute for the thorax

Step 13: - again run the dubbing right up to the foam tightly and whip finish the fly. A real killer Suspender buzzer that was given to me by Scottish Internationlist Robbie Baldie many years ago and has caught many trout frm Loch Leven and other waters

Enjoy

Dave Downie

Link to Post - Back to Top IP:

Logged

David C Downie
Team Scotland

www.flyfishingworld.co.uk
dave@flyfishingworld.co.uk

Where Quality is all that matters.

peter
Senior Member

member is offline

Joined: Jun 2003
Gender: Male

Posts: 419
Location: Bucks

Re: Suspender buzzer Heads My Way :)
« Reply #1 on Apr 15, 2006, 8:00am »

Thats handy David, was tying mine back to front, easier your way. ::)

Link to Post - Back to Top IP:

Logged

3lbgrayling
5 Star Member

member is offline

[avatar]

summer grilse

Joined: May 2005
Gender: Male

Posts: 2,953
Location: central scotland

Re: Suspender buzzer Heads My Way :)
« Reply #2 on Apr 15, 2006, 8:22am »

david at point 5.do you tie of the thread, then tie in again at the back of the foam .if not how do you get the tread to the back of the foam head .sorry for being so stupid.

jim

Link to Post - Back to Top IP: